Shows a form dealing with scrap during setup when first piece control is performed in eTouch. For this to work you have to go to the form called eTouch parameters 2 via "Client" -> "Administration" -> "System settings" - "eTouch" -> "eTouch parameters 2". There you have to activate the tick box called "Multi orders". After this is done you go back to eTouch and now you will see the form after the first piece control is done. See pictures below.
Please note that if you use a scrap code ("Scrap code setup", eTouch settings) for the machine there will be an adjustment done by the scrap code of the scrap adjustment. However, if there is NO such scrap code active there will instead be an adjustment of the prima quantity. Regardless of what choice you made, the system will show a form which will inform you how many of the articles of the current order will be scrapped. When this message has been approved the report will go through.
If the adjustment of prima quantity is used, it will set a text "Report generated by SF61" on the transactions generated this way. If you instead should use a scrap code there will be no text on the report itself. Instead, the scrap code will end up on the report.
